Enviroment control system

The TrolMaster DSH-2 Humidity control/device modules allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. This module allows control of any humidifying or dehumidifying device under the world voltage standard (100-240 VAC, 50/60 Hz), up to 10-amps. *Use with dehumidifiers that use less than 7 amps to avoid current overload. nput Voltage:                               240 VAC, 50/60Hz Output Current:                          10A Output Voltage:                          100~240 VAC, 50/60Hz Working Environments:               Temperature 32-122°F, Humidity=90% Package Dimensions:                   85mm(L) x 80mm(W) x 90mm(H) G.W. per pack:                             0.34kgs

Read more less

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  This LMA-15 lighting adapter is specially designed for DLI ballast. Features: LED Power Indicator Convert Digital Signal to Analog Signal Seamless Connection with Hydro-X with RJ12 Cable Plug & Play 

Read more less

TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  The LMA-T is specially designed for the ThinkGrow LED systems, providing two channels control, which allows separate control for full spectrum and second red output levels on the ThinkGrow LEDs. The LMA-T simply connects to the lighting control ports Line 1 and Line 2 on the HCS-1. Once connected, the user can then set individual ON and OFF times and the dimming settings for the full spectrum LEDs and also for the second red LEDs. The LMA-T then is connected to the RJ type lighting control cables where each of the LEDs are connected back to the controller in a daisy-chain configuration using plug-and-play connections. One adaptor could run up to 256 ThinkGrow LEDs.  * Convert RJ12 to Water Proof Connector Cable included. Features: LED Indicator Plug & Play

Read more less

The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the user will receive a user-alert on their phone to alert them to the potential problem BEFORE the problem gets out of hand. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors" Features: Small Button for Address Assignment Built-In  Photocell Detecting Day/Night Mode Plug & Play 

Read more less

The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors" Features: Built-In Photocell Detecting Day/Night Mode   Plug & Play

Read more less

The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for both Hydro-X Pro and Hydro-X Plus systems.  Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device.  The MBS-PRO features a built-in LCD display to show the current conditions of that sensor which provide the ease of onsite monitoring. It also features a new “push-lock” connection to make installation easy. Please Note: The MBS-Pro requires the SPH-1 for supplemental power.   "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors" Features: Plug & Play Build-in LCD for onsite monitoring 

Read more less

The AMP-3 Sensor Board can be used as a bridge between the sensors (pH Sensor & EC/Temp Sensor) and the Aqua-X Pro/Tent-X Controller. It is specially designed for the Aqua-X and Tent-X system. It can be connected to the main controller with a standard RJ12 cable. Multiple units can be connected into one system for multiple monitoring applications. The pH level, EC level and water temperature will be displayed on its LCD screen and the master controller screen. Features: LCD Display for onsite monitoring  RJ12 connection for flexible installation  Addressing key for multiple units application

Read more less

The BM-1 Weatherproof Box is designed for the protection for TrolMaster TS-1/2, HS-1 and ARS-1 controllers from dripping water and low-pressure sprayed water. 

Read more less

The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high. There are many other examples where two conditions can be either combined or split. The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style module. (DSC-1, DSH-1/2, DST-1/2, DSP-1/2, DSV-1 and DSD-1). Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module. FEATURES: LED indicator Plug & Play

Read more less

The DFM-1 is a 1" digital inline flow meter provides accurate measurements of water or a nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system. When it’s used with the Aqua-X Pro, users can set the irrigation schedule to be controlled “By volume”, and the DFM-1 will measure and allow the desired and precise amount of nutrient solution to be used. The DFM-1 sensor can also be used for future functions and may include the ability to sense water leaks and / or line blockages. FEATURES: LCD Display, on-site monitoring  Real-time measuring of water flow  Feed by volume function with Aqua-X Pro main controller

Read more less

The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to users who want to connect to & control devices using the Hydro-X or Aqua-X using a “dry-contact” or relay to activate the device. Many devices require dry contact closure to be controlled or activated. The DSD-1 is the product that you need to control those types of devices. *The DSD-1 can be configured to have the same functions as other TrolMaster’s power modules. The DSD-1 connects to the “devices” line on the Hydro-X and can be set to control an almost infinite number and types of devices such as:Lighting contactorsLight Deprivation curtainsPump contactorsTemperature devicesHumidity devicesCO2 devices*By pressing and holding the top button on the DSD-1, users can manually override the module and turn it ON / OFF.* Consult TrolMaster for questions concerning your particular device. FEATURES:  LCD Display, Easy Operation  Seamless Connection with Hydro-X  Multiple purposes assigment  Plug & Play 

Read more less

The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. This module allows control of any heating or cooling device under the world voltage standard (100-240 VAC, 50/60 Hz), up to 10-amps. FEATURES: LED Power Indicator RJ12 Cable Socket Addressing Plug & Play 

Read more less

TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable. FEATURES: Plug & Play

Read more less

The ECS-2 Extension Cable Set is designed to connect Hydro-X to most LED drivers with a pigtail wiring. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 to Female Barrel Cable. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled are wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter. FEATURES: Plug & Play

Read more less

The ECS-3 provides a 5/8” diameter connector for some of Fluence brands LED fixtures using Threaded Waterproof  Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / Threaded Waterproof  Connector cable. FEATURES: Plug & Play

Read more less

The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable. FEATURES: Seamless Connection Plug & Play

Read more less

The ECS-4 Extension Cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between AMP-2 sensor board and the main controller. FEATURES: Seamless Connection Plug & Play

Read more less

The TrolMaster EFC-1 is specially designed to be used with Tent-X Control System to control the variable fan speed of the EC Fan. The EFC-1 needs to select the mode of output to control the EC Fan in PWM or 0-10V. Each Tent-X can connect a corresponding EFC-1 for Exhaust (F1) and Intake (F2). Each Exhaust (F1)/ Intake (F2) line requires one EFC-1. FEATURES: LCD Display for PWN 0-10V Mode Addressing Seamless Connection with Tent-X Main Controller and EC Fan Plug & Play

Read more less

The Hydro-X Plus / HCS-3 system is a professional-grade single-zone environmental control system that can control your entire grow space. It has an 800x480 7” LED display monitor and can control an unlimited number of lights, 8 temperature devices, 8 humidity devices, 4 CO2 devices, and 12 programmable timer devices (up to 50 schedules can be created). With incredible flexibility and the expanded product capacity, anyone can now easily customize their own grow room control system for maximum yields. Having multiple control modules also provides the option for the user to create multiple "stages" of temperature and humidity control, which will provide a more stable environment.  The HCS-3 system comes with an MBS-PRO 4-in-1 sensor to measure temperature, humidity, CO2 ppm, and the presence of light. Lighting control has never been easier or more capable. The optional MBS-PAR light sensor can be added to the system. It will automatically adjust light intensity to precisely provide the exact amount of illumination for optimum plant growth. The Hydro-X Plus has been can also track your DLI levels. Having 2 separate lighting control channels allows the user to create multiple lighting layouts (and dimming sequences) based on their individual preferences.  Besides controlling your room, if a problem is detected by the HCS-3, a warning message (notification) will be sent to your smartphone. Up to 10 smoke detectors and 10 water leak-detectors can be connected to the HCS-3 which will alert you if there are any fire or water leaks. The HCS-3 also offers multiple advanced functions to control your entire grow room or greenhouse such as Sunrise / Sunset simulation, DLI control, overheat protection, Spectrum & Group lighting control, and more. FEATURES: 7" Touchscreen Fully Customizable Compatible with MBS-PRO 4-in-1 Sensor Expanded control device capacity Advance Lighting Control Function (DLI Control, Spectrum Control, Group Control, Cloud Control) Customized Wallpaper Free Smart Phone App control

Read more less

The TrolMaster EC & Temperature probes provide accurate and reliable monitoring on the EC and temperature of the water being monitored by the Aqua-x. The PCT-2 probe is a commercially rated probe and it connects to the Aqua-x via the AMP-2. It is intended to be placed into a water tank. FEATURES: Suitable for wide range of applications: Hydroponics, Aquariums, Laboratory etc. 3.6-meter long cable for flexible placement. Mini DIN terminal allows direct connection to AMP-2 Sensor Board.

Read more less

The TrolMaster pH probes provide accurate and reliable monitoring on the pH of the water being monitored by the Aqua-x. The PPH-2 probe is a commercially rated probe and it connects to the Aqua-x via the AMP-2. It is intended to be placed into a water tank. FEATURES: Suitable for wide range of applications: Hydroponics, Aquariums, Laboratory etc. 3.6-meter long cable for flexible placement BNC terminal allows direct connection to AMP-2 Sensor Board

Read more less

The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors.  The SPH-1 is also a powered hub, meaning that it will boost the signals passing through the SPH-1 allowing more modules, sensors and light adapters to be connected to the TrolMaster controllers. By using the SPH-1, an almost unlimited number of LED / HID lights can be controlled using a single TrolMaster controller. The SPH-1 comes complete with the SPH-1 hub, a 16 foot RJ12 cable and the 12vdc power supply.  The SPH-1 can be located in a central location with a single RJ12 cable connecting it to the main controller. From the SPH-1 hub, the individual RJ12 jacks can be connected to each of the sensors, device modules, or lighting adapters. NOTE: If you are using the SPH-1 to interconnect your lighting systems together back to a single LMA adapter (except for LMA-T and ThinkGrow light system), DO NOT connect the 12 volt dc power supply to the SPH-1. FEATURES: LED indicator  Plug & Play

Read more less

The TS-1 thermostat stations is designed to replace a thermostat connected to a conventional cool only HVAC unit. The TS-1 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS  modules so multiple HVAC systems can be controlled by a single Hydro-X system.  FEATURES: LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play 

Read more less

The TS-2 thermostat stations is designed to replace a thermostat connected to a standard HVAC unit. The TS-2 can be used to control most HVAC systems including heat pump and multi-stage HVAC systems. The  TS-2 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS  modules, so multiple HVAC systems can be controlled by a single Hydro-X system. The TS-2 also has an adjustable delay time for each HVAC systems being activated. That minimizes high start-up (inrush current) and allows up to 4 HVAC systems to be safely controlled. FEATURES: LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play 

Read more less