Enviroment control system

The TrolMaster EC & Temperature probes provide accurate and reliable monitoring on the EC and temperature of the water being monitored by the Aqua-x. The PCT-1 probe connects to the Aqua-x via the AMP-2. Features: Suitable for wide range of applications: Hydroponics, Aquariums, Laboratory etc. 3.6-meter long cable for flexible placement. Mini DIN terminal allows direct connection to AMP-2 Sensor Board.

Read more less

TrolMaster's Tent-X (TCS-1) is a state-of-the-art professional-grade and modularly designed environmental and irrigation control system, designed for single-zone grow tents. Thanks to the controller's compact hydroponic capabilities, it allows the user to effectively control their tent's environmental parameters and irrigation schedule with a single control system. It comes with a 3-in-1 temperature, humidity, and light sensor, the MBS-TH. Users can daisy-chain the MBS-TH sensor with the CO2 sensor (MBS-S8), the full spectrum quantum sensor (MBS-PAR), and the smoke and water detectors into the TCS-1's SENSOR port. Users can also connect an AMP-3 sensor board to the Tent-X, and connect the Water content sensors (WCS-1/2) or the WD-1 water detector to the sensor board. Additionally, the TCS-1 supports the connection of up to four DS-type plug-in control models, allowing you to connect devices that can control the environment and irrigation. The TCS-1 is the brain that unites all your climate control and irrigation devices into one being, allowing your devices to work together to create the optimal growth environment for your plants. Features: Grow Tent Grow Lights Climate Irrigation Compact Hydroponic Control System Modular Design & Fully Customizable Smartphone Control Complete Controlled Device Capacity Data Logging

Read more less

The HS-1 from TrolMaster is used to control commercial dehumidifiers. Most larger / commercial dehumidifiers have a “low-volt” control option so the dehumidifier can be controlled by an external humidistat. The HS-1 works and is wired exactly like an external humidistat. The HS-1 is the best way to control your dehumidifiers by eliminating the need to control the high-amperage / inrush current associated with dehumidifiers. Output Voltage:                        24V Maximum Current:                   1A Working Environment:             Temperature 32-122°F, Humidity=90% Packaging Dimensions:            160mm(L) x 86mm(W) x 86mm(H)

Read more less

DLM-4 Zone controller Designed to set up your Daily Lighting Management The DLM-4 zone controller has all the features to be the perfect lighting controller. The four zones can be programmed entirely independently. Each zone can connect up to 200 lights and a sensor. This means the total amount of lights that can be controlled is 800 with four sensors. Safety features The controller also protects the crop, in case the temperature goes over the maximum setpoint the lights will be automatically dimmed or shut down if necessary. After the dimming event, it is logged so the user can look into the cause.  

Read more less

DLMini Controller To control your fixtures The DLMini controller is a simple controller that allows the user to set the output level of all DLI fixtures, LED, HPS, CMH, and UV. This controller is ideal to be used when conventional switching gear turns lights on and off. In those cases, the DLMini controller is the ideal product to change the output level of the fixtures without having to navigate through menus. Use and adjust percentage Switch the on/off switch to I to switch on the controller. Then press the menu button to switch between the different percentages. The LED indicator will show you which percentage you have chosen. Power< 60W Voltage range 100V - 240V IP rating IP20 Product dimensions 6.3x4.1x1.6 inch / 16x10.5x4 cm Product weight 0.4 lb / 0.18 kg Certifications ETL Country of origin PRC

Read more less

3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors" Features: Built-In Photocell Detecting Day/Night Mode Plug & Play 

Read more less

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  The lantern lighting schedule is a lighting routine that enhances the growth of the plants in vegetative stage. The lighting schedule consists of having lights on for 12 hours, turning the lights off for 5.5 hours, turning it back on for 1 hour and finally turning the lights off for another 5.5 hours. This 24 hour schedule is then repeated for a plant’s vegetative stage. Turning on the lights for an hour in between the off hours inhibits florigen production, which prompts the plant to stay in a high growth vegetative state. This LMA-24 lighting adapter is specially designed to use both two channels on the Hydro-X system to create a lantern schedule control for any lights with 0-10V protocol. It is compatible with HIDs like Gavita/Nanolux/Luxx/Growers Choice/Illuminar/PL and LEDs like Fluence/Next light/Spectrum King; *LMA-24 is designed for lights with 0-10V protocol control Features: LED Power Indicator Convert Digital Signal to Analog Signal Seamless Connection with Hydro-X with RJ12 Cable Plug & Play 

Read more less