Trolmaster

Provides accurate, cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants.Feature HighlightsImproved LED Accuracy — Spectral range of 389-692nm ± 5nm, with improved spectral response for LED measurement.Automatic Light Adjustment — Used with the Hydro-X controller, automatically increases or decreases supplemental lighting to maintain your selected PPFD level.SpecsSpectral Range389-692nm ± 5nmCompatibilityUsed with the Hydro-X controller for automatic supplemental light adjustment. Keep dry and clean to avoid premature failure.

Read more less

Provides accurate, reliable EC and temperature monitoring of the reservoir water being monitored by the Aqua-X.Feature HighlightsBroad Application — Suitable for hydroponics, aquariums, and lab use.Flexible Placement — 3.6m long cable for flexible positioning.SpecsCable Length3.6mTerminalMini DINCompatibilityConnects to the Aqua-X via the AMP-2 sensor board.

Read more less

A state-of-the-art, modularly designed environmental and irrigation control system built specifically for single-zone grow tents, effectively controlling both environmental parameters and irrigation from one unit.Feature HighlightsCombined Climate + Irrigation Control — Unites climate control and irrigation devices into one compact hydroponic control system.Daisy-Chain Sensor Support — Chain the included MBS-TH sensor with CO2 (MBS-S8), quantum light (MBS-PAR), smoke, and water detectors into the SENSOR port.Expandable Device Capacity — Supports up to four DS-type plug-in control modules for environment and irrigation devices.Data Logging — Tracks system activity for review and troubleshooting.SpecsDesignModular, single-zone grow tentPlug-In Module SupportUp to 4 DS-type modulesCompatibilityComes with the MBS-TH 3-in-1 sensor; supports an AMP-3 sensor board with WCS-1/2 water content sensors or a WD-1 water detector.

Read more less

Used to control commercial dehumidifiers that accept an external "low-volt" humidistat input, eliminating the need to directly switch the high-amperage inrush current associated with dehumidifiers.Feature HighlightsDirect Humidistat Replacement — Wired exactly like an external humidistat.Reduces Load on Your Controller — Handles high-current switching separately from your main control system.SpecsOutput Voltage24VMax Current1AOperating Range32-122°F, up to 90% humidityDimensions160 x 86 x 86mmCompatibilityDesigned for commercial-grade dehumidifiers with a low-volt control input.

Read more less

Lets you easily connect and control standard humidifying or dehumidifying devices to the Hydro-X, working across the world voltage standard.Feature HighlightsUniversal Voltage Support — Controls devices under the world voltage standard, up to 10 amps.Broad Device Compatibility — Works with both humidifying and dehumidifying equipment.SpecsInput Voltage240 VAC, 50/60HzOutput Current10AOutput Voltage100-240 VAC, 50/60HzOperating Range32-122°F, up to 90% humidityDimensions85 x 80 x 90mmWeight0.34kgCompatibilityUse only with dehumidifiers drawing less than 7A to avoid overloading the module.

Read more less

A high-quality surveillance camera designed specifically for grow rooms, providing 24/7 live video monitoring, linked to any TrolMaster HCS controller.Feature HighlightsPlant-Safe Night Vision — Invisible IR illuminators see up to 35ft/10m without disrupting plant morphology during the dark period.3-Megapixel Live Footage — Low-latency internet live video via the TM+/TM+ Pro app.Expandable Storage — Built-in MicroSD slot supports up to 64GB for local recording.Weatherproof — IP66 water-resistant, supports H.264/HEVC codecs.SpecsResolution3 megapixelsNight Vision RangeUp to 35ft / 10mIP RatingIP66StorageMicroSD up to 64GBCompatibilityMust be linked to a TrolMaster HCS/TCS controller connected to the app — cannot be used standalone.

Read more less

Controls variable-speed fans using the current temperature to increase or decrease fan speed — a very economical, efficient way of dealing with heat in an enclosed space.Feature HighlightsTemperature-Responsive Speed — Increases fan speed as heat rises, decreases it as temperature falls.Built-In Photocell — Automatic day/night control.Digital Display — Clear readout of current settings and status.SpecsControl TypeTemperature-responsive, day/nightCompatibilityStandalone variable-speed fan controller — wires directly to your fan.

Read more less

A simple solution for mini-split air conditioners, learning your remote control's signals to automatically switch between day and night temperature settings.Feature HighlightsLearns Your Remote — Uses your mini-split's own remote to learn how to change setpoints.Automatic Day/Night Switching — Sends the same IR signal as your remote via a built-in IR emitter, based on photocell status.Broad Compatibility — Works with just about any brand of mini-split unit.SpecsControl MethodLearned IR signal replicationCompatibility"Teach" the Beta-1 using your mini-split's original remote control before use.

Read more less

A precision CO2 NDIR sensor/controller in an affordable, easy-to-use package, automatically activating your supplemental CO2 system to maintain CO2 PPM only during daylight hours.Feature HighlightsHigh-Quality Remote Sensor — 16ft cable with built-in photocell for automatic daylight-only operation.Fuzzy-Logic Control — More accurately controls compressed CO2 systems.Adjustable Deadband and Min-Max Recall — Fine-tune your CO2 control settings.Field Re-Calibratable — The CO2 sensor can be re-calibrated and continues operating accurately for years.SpecsSensor Cable16ft remote CO2 sensorCompatibilityStandalone — doesn't require a Hydro-X controller.

Read more less

Features a precision humidity sensor within a 16ft remote probe assembly, letting you plug in a humidifier or dehumidifier and control it automatically based on day/night settings.Feature HighlightsWide Humidity Range — Settings from 20-90% RH.Either Direction — Controls humidifiers or dehumidifiers equally.Automatic Day/Night Control — Built-in photocell automatically switches between your two settings.SpecsHumidity Range20-90% RHProbe Cable16ft remoteCompatibilityPlug your humidity device directly into the power outlet on the base of the BETA-6.

Read more less

A 3-prong volumetric water content (VWC) sensor measuring the moisture level of your grow medium, compatible with a broad range of TrolMaster controllers.Feature HighlightsOn-Sensor LCD Readout — Built-in LCD activates when the sensor is shaken/disturbed, showing live VWC%.Multi-Controller Support — Works with Aqua-X (NFS-1), Aqua-X Plus (NFS-3), Aqua-X Pro (NFS-2), Hydro-X Pro (HCS-2), and Tent-X (TCS-1) — connection limits vary by system.SpecsMax Sensors (NFS-2/HCS-2)50Max Sensors (NFS-3)20Max Sensors (NFS-1)8Max Sensors (TCS-1)1CompatibilityInsert the 3-prong sensor into coco, soil, or rockwool. Note the TCS-1 supports only a single WCS-3.

Read more less

A professional-grade, fully customizable, modularly designed irrigation control system, controlling up to 30 separate irrigation zones with reservoir and medium moisture monitoring.Feature HighlightsMulti-Zone Control — Controls up to 30 outputs (24VAC solenoid valves or 120VAC pumps), managing multiple rooms and zones from one system.Water Quality Monitoring — Monitors pH, EC, and water temperature, plus growing medium moisture using up to 8 Water Content Sensors.Flexible Timers — Set up recycling timers or specific time-of-day schedules.Remote Alerts — Free TrolMaster App gives access to settings and alerts from anywhere.SpecsMax Outputs30 (24V or 110V)Water Content SensorsUp to 8CompatibilityComes with a WD-1 water detector for leak alerts and watering confirmation — the NFS-1 is the system's central brain, with additional sensors and modules connecting via RJ12 daisy-chain.

Read more less

A professional-grade, single-zone environmental control system, fully customizable and modularly designed for simple installation and easy expansion.Feature HighlightsBroad Equipment Control — Controls most grow light brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, plus CO2 generators or regulators.Fully Customizable — Modular design lets you build your setup exactly as needed.Free Smartphone App — Access all settings and alerts remotely, anytime.SpecsDesignModular, single-zoneCompatibilityComes complete with an MBS-TH 3-in-1 sensor; additional modules connect via RJ12 daisy-chain to expand system capability.

Read more less

Provides accurate, reliable pH monitoring of the reservoir water being monitored by the Aqua-X.Feature HighlightsBroad Application — Suitable for hydroponics, aquariums, and lab use.Flexible Placement — 3.6m long cable for flexible positioning.SpecsCable Length3.6mTerminalBNCCompatibilityConnects to the Aqua-X via the AMP-2 sensor board.

Read more less

Lets you monitor the percentage of water/nutrients within your growing medium in real time, helping visualize dry-down time and adjust irrigation cycles accordingly.Feature HighlightsMulti-Unit Averaging — Up to 8 WCS-1 sensors can connect to a single Aqua-X, with displayed values averaged across all connected sensors.Graphed Data — View dry-down data as a graph through the app.Alarm Function — Alerts when your set water-content threshold is exceeded.SpecsMax Sensors per Controller8CompatibilityConnects to the Aqua-X controller; readings appear on the sensor itself, the Aqua-X, and the app.

Read more less

Solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioner, working with most mini-split (and some window-type AC) units.Feature HighlightsLearns Your Remote — "Teaches" IR signals from your existing remote to the ARS-1 module.Automatic Setpoint Switching — Sends signals to your mini-split automatically, based on the photocell's day/night status.Universal Compatibility — Works with most mini-split brands that ship with an IR remote.SpecsControl MethodLearned IR signal replicationCompatibilityWorks with any mini-split AC (or compatible window unit) that ships with an IR remote control. "Teach" the ARS-1 using your AC's original remote before first use.

Read more less

An improved inline/drop-in pH probe with a reduced-diameter, threaded body for tight installations, featuring an improved sensor element for more stable, reliable performance.Feature HighlightsDrop-In Installation — Threaded body fits directly into standard 3/4" PVC tee fittings.Broad Application — Suitable for hydroponics, aquariums, and lab use.SpecsCable Length3.6mTerminalBNCCompatibilityWorks with the AMP-2 or AMP-3 sensor module. Threaded body allows direct installation into a 3/4" PVC tee in the irrigation line.

Read more less

A multi-function timer module letting you easily connect any device that needs to be controlled by time, working across the world voltage standard.Feature HighlightsUniversal Voltage Support — Controls any device under the world voltage standard, up to 10 amps.Plug & Play — LED power indicator and RJ12 cable socket for simple setup.SpecsVoltage Range100-240 VAC, 50/60HzMax Current10ACompatibilityWorks with Hydro-X/Aqua-X systems for time-based device control.

Read more less

A low-voltage output module for the HCS-1 and HCS-2 controllers, letting you directly connect low-voltage devices like solenoids, valves, and alarms.Feature HighlightsSelectable Output — Outputs 12 or 24 VDC (up to 0.5A) or 12 or 24 VAC (up to 4.8VA), user-selectable.Multi-Purpose Assignment — Addressable as a temperature, humidity, CO2, or timer device module.Plug & Play — LCD display for easy operation.SpecsDC Output12 or 24 VDC, up to 0.5AAC Output12 or 24 VAC, up to 4.8VACompatibilityWorks with HCS-1 and HCS-2 controllers for directly connecting low-voltage devices.

Read more less

A lighting control adapter specially designed to let the Hydro-X system control DimLux ballasts using their low-volt control option.Feature HighlightsDimLux-Specific Design — Purpose-built for DimLux ballast compatibility.Signal Conversion — Converts digital signal to analog for seamless control.Plug & Play — LED power indicator with RJ12 cable socket.SpecsConnectionRJ12 cable socketCompatibilitySpecially designed for controlling DimLux ballasts.

Read more less

A lighting control adapter specially designed to let the Hydro-X system control Phantom ballasts using their low-volt control option.Feature HighlightsPhantom-Specific Design — Purpose-built for Phantom ballast compatibility.Signal Conversion — Converts digital signal to analog for seamless control.Plug & Play — LED power indicator with seamless RJ12 connection to Hydro-X.SpecsConnectionRJ12 to Hydro-XCompatibilitySpecially designed for controlling Phantom ballasts.

Read more less

A 0-10V protocol lighting adapter supporting a wide range of third-party HID and LED brands, letting the Hydro-X system control lights via their low-volt control option.Feature HighlightsBroad Brand Compatibility — HIDs: Gavita, Nanolux, Luxx, Growers Choice, Illuminar, PL. LEDs: Fluence, Next Light, Photobio.High Capacity — Each adapter controls up to 40 HID lights or 24 LEDs.Expandable with SPH-1 — Add multiple LMA-14 units with an SPH-1 hub to control as many lights as required.Plug & Play — LED power indicator and seamless RJ12 connection to Hydro-X.SpecsMax HID Lights40 per adapterMax LEDs24 per adapter (12 for Fluence Spyder 2x/2i @277V or Aelius LEDs @277V+)CompatibilityDesigned for lights with 0-10V protocol control. Combine with an SPH-1 hub to control more lights than a single adapter supports.

Read more less

A professional-grade, single-zone environmental control system with an 800x480 7" LED display, capable of controlling an unlimited number of lights alongside temperature, humidity, and CO2 devices.Feature HighlightsExpanded Device Capacity — Controls 8 temperature devices, 8 humidity devices, 4 CO2 devices, and 12 programmable timer devices with up to 50 schedules.Multi-Stage Environmental Control — Multiple control modules let you create separate temperature/humidity "stages" for a more stable environment.Advanced Lighting Functions — DLI control, Spectrum Control, Group Control, and Cloud Control, plus Sunrise/Sunset simulation and overheat protection.Smartphone Alerts — Get notified instantly if a problem is detected; connect up to 10 smoke detectors and 10 water-leak detectors for fire/leak alerts.SpecsDisplay7" touchscreen, 800x480Temperature DevicesUp to 8Humidity DevicesUp to 8CO2 DevicesUp to 4Timer DevicesUp to 12 (50 schedules)CompatibilityComes with an MBS-PRO 4-in-1 sensor; the optional MBS-PAR light sensor can be added for automatic light-intensity adjustment. Free smartphone app for remote control.

Read more less

A commercially rated EC and temperature probe for monitoring nutrient solution directly in a reservoir tank.Feature HighlightsBroad Application — Suitable for hydroponics, aquariums, and lab use.Flexible Placement — 3.6m long cable for flexible positioning.SpecsCable Length3.6mTerminalMini DINCompatibilityConnects to the Aqua-X via the AMP-2 sensor board via its Mini DIN terminal.

Read more less