Gavita Grow Lights

The Gavita Interconnect Cable RJ14/RJ14 for Master Controller is part of the high-performance grow light accessories for Gavita's equipment. The cable provides superior quality and it's compatible with Gavita's plug and play solutions including e-series fixtures and controllers. Growers use original Gavita grow light accessories to ensure optimal performance and reliability of the grow room's equipment. General Information The Interconnect cord RJ14/RJ14 is used to ensure controller signal from one ballast to another; The cord is made for use with Gavita's Master Controller EL1 and EL2; The cord is available in different lengths such as 60 cm, 150 cm, 240 cm, and 300 cm. Benefits The cord is durable; The cord is made at Gavita's quality standards; The interconnect cord ensures delivery of the controller signal from one ballast to an additional ballast. The Science The E-series Interconnect cord connects light fixtures when you set up a daisy chain. To connect the light fixture to the Master Controller EL1/ EL2, use the Controller cable. The cord comes in a variety of configurations to suit the needs of your grow room. How to Use Use the cord to connect light fixtures when daisy chaining.

Read more less

Gavita Controller Cable RJ9/RJ14 is made to connect the EL1 or EL2 Master Controller to the E-series light fixtures. The cable supplies the controller's signal from one ballast to another. Gavita's range of grow light accessories offer the best connectivity solutions to growers worldwide. You'll enjoy superior quality and optimal compatibility for your E-series fixtures and control equipment. General Information The cord is made for use with Gavita light fixtures; The cord is available in 3 sizes such as 150 cm, 480 cm, and 760 cm. Benefits The accessory is durable; The cord belongs to Gavita's range of premium grow light accessories; The cord is made at the highest Gavita quality standards. The Science The Controller Cable RJ9/RJ14 connects the EL1 or EL2 Master Controller to light fixtures. To daisychain from light fixture to light fixture, you must use a different cord.

Read more less

GAS provides a wide variety of cables, which allow you to optimise your grow room for the best harvest yields. Set up the extraction system and achieve the desired layout with the GAS 5m Gavita/Male Cable. It's one of the most efficient fan accessories provided by GAS. The cable allows you to connect your fans to controllers to reach a balanced grow room climate. General Information The cord helps you connect the fans to controller; It's 5m in length. Benefits It's resistant and durable The Science The cord allows you to connect EC fans to controllers. The cord connects to ports on ELF1 or ELF2. For 2 fans, you must use a Y splitter.

Read more less

The Gavita ECM Controller Cable – 3 m – Master Controller allows growers to connect the external contactor units to the Master Controller. Connect CO2 generators, heaters or dehumidifiers to the ECM. The Master Controller controls the ECM. The cable is part of Gavita's grow light accessories and switches auxiliary equipment during lights-off and lights-on periods. General Information The cord is part of Gavita's high-performance grow light accessories; The cord is 3 m in length. Benefits The cord is made at Gavita's highest quality standards; The cord ensures optimum performance of your grow room's equipment. How to Use When you connect the Gavita Master Controller to the ECM, press the white buttons, which you'll find above the contact opening. Plug the end of the signal cable into the ECM's cage clamps. Release the buttons to secure the wires. Link the wire to the cage clamps in the Master Controller. Install and connect the ECM before you plug it into the power mains.

Read more less

The GAS - Gavita/Female Cable is made to extend the length of the cabling between 2 male cords. The cord is made from top-quality materials and it's resistant. The cord is designed to optimize the equipment in your grow room and help you achieve the right layout. Use the fan accessories from GAS to maintain a high-performance grow room environment. General Information The cable extends the length of the cabling between 2 Gavita GAS male cords; It includes top-quality materials. Benefits The cord is durable and reliable; It's one of GAS' top-quality fan accessories; It's user-friendly.

Read more less

The Gavita EFM1 AC Fan Controller Module allows you to connect an AC fan to your Master Controller. The unit is a plug and play solution to control the fan. When you can adjust your fan efficiently, you can lower the noise levels and power usage. On a lower speed, the unit reduces losses through burst modulated control. On higher speeds, the controller turns to phase cut control to guarantee optimum efficiency levels. You can plug the EFM1 fan controller between the AC fan and the power outlet. Use a signal cable to adjust it from the ELF. General Information The unit connects the fan to the Gavita Master Controller; It's a plug and play solution to adjust the fan; At low speeds, the unit uses burst modulated control. At higher speeds, the unit uses phase-cut control. Benefits Increased levels of reliability and durability; Made at the Gavita standards of quality; Low production of noise; Delivered with local plug variations such as EU, US, and AUS plugs. The Science The unit is a smart AC fan control module, which is made for ELF controllers. You can adjust your fans as quiet and efficiently as needed. At lower speeds, the unit uses burst modulated control to decrease noises. At higher speeds, the unit uses phase-cut control for increased efficiency. How to Use Plug the unit between the fan and the power outlet. Use a signal cable to control the EFM1 from the ELF.

Read more less

The Gavita – FB1 Fan Controller Module allows you to balance power to the intake and extraction fans. Extra filters and ducting influence the airflow and may lead to overpressure in the grow room. With the AC fan or EC fan balancer, you can control the inlet or extraction fans to achieve a balance between these 2 airflows. To maintain optimum pressure in the grow room, you must balance both the extraction and intake fans. Offset the intake fan by up to 70% to balance flow of air in your grow room. General Information The unit allows you to balance the intake and extraction AC/EC fans; You can offset the intake fan to achieve a balanced airflow; You can adjust your fan up to 70%; It's compatible with any size EC fans. If you have an AC fan you must use an EFM1 module. Benefits It's resistant and efficient; It's made at the highest Gavita standards of performance and quality. The Science To balance the intake and extraction airflows or your fans, you must use the FB1 fan controller module. The unit helps you achieve optimum pressure in your grow room. How to Use The unit is suitable for EC fans of all sizes and capacities. Use the EFM1 module for an AC fan.

Read more less

Gavita - Master Controller EL2F Gen2 optimizes the ventilation and lighting conditions in your growroom. The unit's efficient algorithms control the environmental conditions to maximize your crops' growth. The controller can fine-tune up to 80 Gavita lights, 8 EC fans, and it can also connect to AC fans. Thanks to the event logging feature, you can check auto dims, temperatures, and auto shutdowns. In case of a power shutdown, the controller stores all data. It's easy to install and stabilizes environmental conditions.   General Information Gavita - Master Controller EL2F Gen2 controls EC fans and lighting conditions; Provides essential growroom data thanks to the event logging feature; Includes a high-performance PID (Proportional, Integral, Derivative) fan control; The "Sunrise" and "Sunset" modes include pre-defined settings; You can run 2 separate rooms in 12/12 lighting cycles.   Benefits The interface is user-friendly; Event logging feature; Smart PID algorithm; Controls EC and AC fans; Centralizes dim, switch, and boost cycles; You can program 2 separate channels for different rooms.   The Science The Gavita Master Controller EL2F Gen 2 is an improved controller, which includes precise functionalities. The smart PID algorithm, which optimize temperature conditions, learn how to adjust temperatures with minimum shifts between states. It provides stable growth conditions, with minimum temperature fluctuations. You can monitor the light and temperature conditions via the logging events capability. Measures include autodim events, high and low temperatures, power outages, and shutdowns. The inverse mode allows you to run two separate rooms on different light cycles such as 18/6 and 12/12. The versatility of the controller allows you to optimize the environmental conditions in your growroom to maximize harvests. The Sunrise/ Sunset modes allow you to determine the right light conditions. You'll minimize the risk of plant disease and rot. The controller automatically dims the lights when temperatures rise to increased levels and exceed the established settings. Thanks to maintaining your plants' stomata open, you'll optimize photosynthesis. The controller's emergency feature will shut down all lights if the temperatures reach very high rates.   How to Use The Gavita Master Controller EL2F Gen 2 is compatible with digital fans and the entire range of Gavita E-Series light fixtures. The Gavita Master controller comprises 2 outputs for ECMs (External Contractor Modules). During the lights off or lights on periods, the ECM units can switch a load of 15 amps of equipment. You can switch the humidifier, CO2 accessories, watering units and heating systems.

Read more less