Products

The LUMii SOLAR 630 is a complete fixture that powers 2 x 315 ceramic discharge metal-halide lamp (CDM) that will give your plants the best possible spectrum of light.   Specifications: Short circuit protection Use for both supplementary and stand alone lighting Extremely high PAR levels

Read more less

The LUMii SOLAR 315w ceramic-discharge metal-halide (CDM) lamps deliver a light spectrum that's much closer to natural sunlight than typical High-Intensity Discharge (HID) systems. The daylight lamp, with a colour temperature of 4200K, is specifically optimised for vigorous vegetative growth. General Information These state-of-the-art lamps generate a greater level of useable plant light (photosynthetically active radiation). They have a low power consumption and heat output and they produce a very high-quality end product.

Read more less

Overview The LUMii SOLAR 315w ceramic-discharge metal-halide (CDM) lamps deliver a light spectrum that's much closer to natural sunlight than typical High-Intensity Discharge (HID) systems. The daylight lamp, with a colour temperature of 4200K, is specifically optimised for vigorous vegetative growth. General Information These state-of-the-art lamps generate a greater level of useable plant light (photosynthetically active radiation). They have a low power consumption and heat output and they produce a very high-quality end product.

Read more less

The LUMii SOLAR 315w ceramic-discharge metal-halide (CDM) lamps deliver a light spectrum that's much closer to natural sunlight than typical High-Intensity Discharge (HID) systems. The daylight lamp, with a colour temperature of 4200K, is specifically optimised for vigorous vegetative growth. General Information These state-of-the-art lamps generate a greater level of useable plant light (photosynthetically active radiation). They have a low power consumption and heat output and they produce a very high-quality end product

Read more less

Overview LUMii SOLAR 630W DE ceramic-discharge metal-halide (CDM) lamps deliver a light spectrum that's much closer to natural sunlight than typical High Intensity Discharge (HID) systems by generating an enhanced level of usable light. General Information The LUMii SOLAR 630W DE CDM bulb has a low power consumption and heat output and they produce a very high-quality end product. The daylight lamp, with a colour temperature of 4200K is specifically optimised for vigorous vegetative growth.

Read more less

Normal household timers are not built to take the high inductive loads produced by HID ballasts. If used with an HID ballast - the contacts inside the timer that open and close the timed circuit will overheat and weld together - breaking the timer and leaving your grow lights permanently on. The LUMii Heavy Duty 24 Hour Plug In Timer is different. It is designed to take high loads and has no problem dealing with the inductive loads produced by a 600 watt ballast. This means no separate contactor is required and saves you money. It has a 96 switching operations within a 24 hour period (every 15 minutes). This timer is suitable for timing one 600w HID ballast or up to 6 x 200w CFLs. It has a robust 'inline' case design with socket and timer dust covers. General Information Can deal with inductive loads produced by 600W ballast. Suitable for controlling 1 x 600W HID ballast or 6 x 200W CFL lights.

Read more less

The LUMii 24 Hour Plug In Timer is ideal for setting day and night on/off lighting period as well as setting a heater on periods and timing irrigation cycles. It is reliable and has a high quality timer unit. This timer has been designed to take a 13 amp plug so there is no need to remove the plug to reset the controls. There are 96 switching operations within a 24 hour period (every 15 minutes). It is ideal for setting on and off (day and night) periods with CFL and T5 as well as LED grow lights and timing pumps for irrigation cycles.

Read more less

LUMii Aero Tubes are high-performance air-cooled reflectors. The products have an innovative design, which helps control the environmental temperature. They're made to be coupled with fans and ducting, which allows for airflow. Each unit includes a removable bulb holder, a 4 m cable, and a 2-part reflector. Use aluminium ducting to install multiple shades in series. General Information The LUMii Aero Tubes are available in 3 sizes including 125 mm, 150 mm, and 200 mm; Each unit comprises a removable bulb holder, a 2-part reflector and a 4 m cable; The 125 mm version can sustain up to 400W. The 150 mm version can power up to 600W. The 200 mm version can power up to 1,000W. Benefits The innovative design allows for free airflow; The units help control the environmental temperature; The units are made of strong glass; The lamp holder is removable.

Read more less

The LUMii Black 600W Digital Kit is an optimized version of the range launched in 2017. The digital kit can be dimmed to a low 250W or 400W to provide increased support to your crops during the late blooming stage. Output can be increased to a maximum of 660W.  General Information The kit includes a LUMii Black Digital Ballast, a LUMii Black 600W HPS (High-Pressure Sodium) bulb, and Light Weight Reflector. Benefits Light output can be adjusted between 250W and 660W 1 Year Electrical Warranty Ballast can be used with any reflector fitted with an IEC socket Affordable, yet reliable  Technical Specifications The bulb included has an output of 88000 lumens and an expected lifetime of 20000 hours making this a cost effective lighting solution. 

Read more less

The LUMii Black 600W Magnetic Kit comes with a magnetic ballast, reflector and 600W LUMii Black HPS bulb. This light unit is widely popular in grow rooms across the country due to its affordability and great results with fruition and flower formation.  It's user-friendly and easy to install. The HPS bulb produces up to 80,000 lumens and has a lifetime of 20,000 hours.   General Information Comes complete with magnetic ballast, 600W HPS bulb, reflector and kettle lead. The ballast's metal case is vented, which helps it operate at optimal rates. The ballast is suitable for use with a 600W bulb. Benefits Dual Spectrum Produces 88,000 Lumens Life expectancy of 20,000 hours

Read more less

The LUMii Black UV Far Red LED bar is designed specifically for use with the 400W LUMii Black Blade. It can also be used with a huge variety of other grow lights, or as supplementary lighting in your grow space. Implementing this adds UVA and Far Red to your grow light spectrum for your plants to benefit from. General Information Only 30W, and compact in design. This supplementary light is easy to connect and install. It's generally recommended that the UV/FR LED bar is on for 2 hours per day during the photoperiod. Benefits Adds UVA (385 nm) to the grow light spectrum  Adds Far Red (730 nm) to the grow light spectrum  Fits directly to LUMii Black Blade 400w LED  Can be used as a supplementary light with any other grow lighting  Powered directly from a mains outlet  How to Use For best results, install and operate in accordance to the instructions provided by the manufacturer in the manual.

Read more less

The LUMii BLACK Blade is an all new dimmable LED quantum board available in three different sizes to suit your designated grow space. Offering a full, balanced spectrum of 3500K (with exception of the 100W), these are composed of 660nm Osram chips for guaranteed results. The 400W variant features a two-plate adjustable design that allows the fixture to be used to cover from 90cm x 90cm to 120cm x 120cm. When adjusted, it creates space to add an additional UV and Far-Red light if required. These are sold separately. General Information 100W is a great alternative to T5, CFL and 250W MH lamps. The 100W fixture is ideal for propagation and vegetative growth. Dimensions = 215 mm x 425 mm x 92 mm (8.5” x 16.7” x 3.6”) 200W is a great alternative to 250W and 400W HID lamps, as well as 315W CMH. Dimensions = 305 mm x 505 mm x 104 mm (12.0” x 19.9” x 4.1”) 400W is a great alternative to a 600W HID fixture. Dimensions = 610 mm – 740 mm (adjustable) x 505 mm x 97 mm (24.0” – 29.1” adj. x 19.9” x 3.8”) Benefits Comes complete with 2m power lead and hanging slides for easy installation Available in three different sizes to suit your space Lightweight, sleek design Can be coupled with the UV and Far-Red add-on bar How to Use For best results, operate in accordance to the instructions provided by the manufacturer in the product manual.

Read more less

The LUMii Black Contactors are a cost-effective option for the scheduling of your grow lights. The unit enables you to set optimum light levels during the day. The contactors' mechanical timer can be set in 15-minute increments. The relay switch activates HID lights. The contactors are available in 4 and 8-way versions. Growers worldwide use LUMii Black Contactors to streamline their grow room lighting. General Information The Black Contactors help growers schedule the grow room lighting in 15 minute increments; The contactors' power bars support 13 Amps each; The unit is made in 4-way and 8-way versions.  Benefits The contactors are cost-effective light scheduling solutions; The units are easy to use, flexible, and lightweight;  The Science LUMii's Black Contactors allow growers to schedule their grow room lighting in 15-minute increments. The relay switch activates the HID lights in safe conditions without overloading the timer. How to Use To activate the Black Contactors, push the timer pins to indicate "ON." Position the ON/OFF switch to the centre, which indicates "timer" mode. Plug the ballasts into the 4-socket power bars. Plug the timer plugs into the main supply sockets. For the best results, LUMii recommend the following configuration: 4 x 315W for 4-socket power bar; 3 x 600W for 4-socket power bar; 4 x 400W for 4-socket power bar.

Read more less

The LUMii Black Digital Ballast is a fully electronic dimmable 600W ballast. This technology is micro-processor controlled and works at higher frequency (hertz) than the standard magnetic ballast meaning more light gets to your plants. It is also more efficient meaning more output per watt of energy consumed. The LUMii Black Ballast is dimmable and also has a boost setting for each lamp size meaning you can take control of the light output. General Information Can be dimmed from 250W - 600W One of the quietest running ballasts on the market.  Lightweight - only 3kg Built in safety features protect the units circuitry if a short is detected. Resin covered on the inside to protect from dust particles and maintain even heat distribution How to Use The dimmable features on the LUMii Black ballast gives the user the ability to control the light output using the phase controller. The dimmable has 4 settings, including a boost setting, giving the user great control. For best results, use the correct lamp per wattage setting. Dimensions 600w: Length: 43cm| Width: 38cm | Height: 18.5cm | Weight: 3.215kg

Read more less

The LUMii Black Digital Ballast is a fully electronic dimmable 600W ballast. This technology is micro-processor controlled and works at higher frequency (hertz) than the standard magnetic ballast meaning more light gets to your plants. It is also more efficient meaning more output per watt of energy consumed. The LUMii Black Ballast is dimmable and also has a boost setting for each lamp size meaning you can take control of the light output. General Information Can be dimmed from 250W - 600W One of the quietest running ballasts on the market.  Lightweight - only 3kg Built in safety features protect the units circuitry if a short is detected. Resin covered on the inside to protect from dust particles and maintain even heat distribution How to Use The dimmable features on the LUMii Black ballast gives the user the ability to control the light output using the phase controller. The dimmable has 4 settings, including a boost setting, giving the user great control. For best results, use the correct lamp per wattage setting. Dimensions 600w: Length: 43cm| Width: 38cm | Height: 18.5cm | Weight: 3.215kg

Read more less

The LUMii Black Digital Ballast is a fully electronic dimmable 600W ballast. This technology is micro-processor controlled and works at higher frequency (hertz) than the standard magnetic ballast meaning more light gets to your plants. It is also more efficient meaning more output per watt of energy consumed. The LUMii Black Ballast is dimmable and also has a boost setting for each lamp size meaning you can take control of the light output. General Information Can be dimmed from 250W - 600W One of the quietest running ballasts on the market.  Lightweight - only 3kg Built in safety features protect the units circuitry if a short is detected. Resin covered on the inside to protect from dust particles and maintain even heat distribution How to Use The dimmable features on the LUMii Black ballast gives the user the ability to control the light output using the phase controller. The dimmable has 4 settings, including a boost setting, giving the user great control. For best results, use the correct lamp per wattage setting. Dimensions 600w: Length: 43cm| Width: 38cm | Height: 18.5cm | Weight: 3.215kg

Read more less

The LUMii Black HPS Bulb 600W bulb is one of the most affordable on the market. It's made in line with the highest LUMii standards, thus helping you maximize your harvest yields. The lamp supports plants development during the blooming phase. The dual spectrum lamp offers perfect lighting to your crops for explosive growth and flowering. General Information LUMii Black HPS Bulb 600W is a dual spectrum lamp; Supports plants during the flowering stage; Produces 88,000 lumens; The bulb has an expected lifetime of 20,000 hours. Benefits The bulb emits intense light; Increased reliability; Made and designed according to LUMii's highest standards.

Read more less

All new from industry leaders LUMii, this 6 bar LED fixture rated at 720W is a great choice for stimulating vigorous growth in your space. To power the light, you will need the LUMii Black 600W Digital ballast which is sold separately. This is the same ballast used for the LUMii Black HPS kits. General Information These lights are lightweight and easy to install by using LUMii rope ratchets whereby you can adjust the height of the fixture in line with the height of your canopy. You can mount the ballast directly onto the fixture, or positioned away from the light unit.  Dimensions: 110cm x 108cm x 5cm Benefits Dimmable from 250W, 400W, 600W. For maximum power, you'll need to use the 600W Boost setting. Full Spectrum - Perfect for use from start to finish PPF of 1870µmol/s - Stronger output than 1000W HPS lamps How to Use For best results, install in line with the manufacturers instructions. The ballast can be fixed directly to the unit, or positioned away from the light outside of the grow space to held reduce heat output.

Read more less

The LUMii BLACK Metal Magnetic Ballast is a 600w metal-cased magnetic ballast, supplied with a flying IEC lead, this ballast enables you to add any reflector fitted with a universal IEC socket.It simple to start growing, just add a reflector and a lamp with the same wattage as the ballast.General InformationThe well vented metal-case ensures the ballast runs cool and quiet and features wall-hanging brackets making them fully wall-mountable, thus making more space in your grow room.The LUMii BLACK Metal-Cased Magnetic ballast can be used with any 600w HID lamp however we recommend using a LUMii SunBlaster 600w or LUMii BLACK 600w HPS lamp to get the best results.It has an IP rating of 20 and runs at 2.9A.Dimensions L x W x H (cm) – 30 x 13 x 13

Read more less

The LUMii BLACK Metal Magnetic Ballast is a 600w metal-cased magnetic ballast, supplied with a flying IEC lead, this ballast enables you to add any reflector fitted with a universal IEC socket.It simple to start growing, just add a reflector and a lamp with the same wattage as the ballast.General InformationThe well vented metal-case ensures the ballast runs cool and quiet and features wall-hanging brackets making them fully wall-mountable, thus making more space in your grow room.The LUMii BLACK Metal-Cased Magnetic ballast can be used with any 600w HID lamp however we recommend using a LUMii SunBlaster 600w or LUMii BLACK 600w HPS lamp to get the best results.It has an IP rating of 20 and runs at 2.9A.Dimensions L x W x H (cm) – 30 x 13 x 13

Read more less

The LUMii BLACK Metal Magnetic Ballast is a 600w metal-cased magnetic ballast, supplied with a flying IEC lead, this ballast enables you to add any reflector fitted with a universal IEC socket.It simple to start growing, just add a reflector and a lamp with the same wattage as the ballast.General InformationThe well vented metal-case ensures the ballast runs cool and quiet and features wall-hanging brackets making them fully wall-mountable, thus making more space in your grow room.The LUMii BLACK Metal-Cased Magnetic ballast can be used with any 600w HID lamp however we recommend using a LUMii SunBlaster 600w or LUMii BLACK 600w HPS lamp to get the best results.It has an IP rating of 20 and runs at 2.9A.Dimensions L x W x H (cm) – 30 x 13 x 13

Read more less